Filter
Top Products
4. MAINTENANCE ENGLISH VERSION EO1-33057
4.1 Cleaning
E4- 5
4.1.3 Under the Media Guides
1. Turn off the power and unplug the printer..
2. Set the Head Lever to the “OPEN” position
3. Open the Top Cover and Right Side Cover.
4. Open the Head Lock Plate.
5. Turn the Pinch Roller Lever clockwise to release the Pinch Roller.
6. Remove the ribbon and media from the printer.
7. Remove the screws to detach the Media Guide.
8. Remove the jammed media, if any.
9. Wipe dirt, dust, or paper particles from the media path.
10. Wipe dust and adhesive off the Media Guides with a soft cloth
moistened with alcohol.
11. Re-install the Media Guides using the screws.
NOTE:
B
e careful not to lose the removed
screws.
Screw
Media Guide
Screw
Media Guide
Media Path
Media Guide