Filter
Top Products
2. PRINTER SETUP ENGLISH VERSION EO1-33056
2.10 Print Test
E2-69
2.10 Print Test (Cont.)
It is necessary to set the issue mode, cut/strip position, etc. for the Printer
Driver or TPCL (TEC Printer Command Language) in accordance with
your printing condition.
For details of the TPCL, refer to the B-SX6T/SX8T Series External
Equipment Interface Specification stored in the CD-ROM.
Regarding how to use the Printer Driver, refer to the Help for the
Windows Printer Drivers screen.
To gain maximum performance and life from the Cutter Module or Strip
Module, periodic cleaning is required.
Before starting a cleaning, be sure to TURN OFF the printer to avoid risk
of injury.
For details of cleaning, refer to Section 4.1.5 Optional Cutter Module
or Section 4.1.6 Optional Strip Module.
When using an optional Cutter Module or Strip Module