Filter
Top Products
Installing Network Fax Software 19
Installing the Network Fax Driver and Address Book Viewer
You can install the Network Fax Driver and Address Book Viewer from the Client Utilities CD-
ROM.
This section describes about installing the Network Fax Driver and Address Book Viewer in a
Raw TCP environment.
Installing from Client Utilities CD-ROM
This section describes how to install fax client software under Raw TCP environments through
TCP/IP, using an installer.
The Network Fax Driver can be set up using the same connection as a printer driver such as,
USB printing, LPR printing, IPP printing, and Novell printing. To set up the Network Fax Driver
using these connections, please refer to the Printing Guide.
To set up the Network Fax Driver in other than Raw TCP environment, see the Printing Guide.
Installing the fax client software for Raw TCP connection using the installer
The procedure presented here describes the installation to Windows 2000 using the installer.
The procedure is the same when Windows XP or Windows Server 2003 is used. (The Network
Fax Driver can also be installed using the Add Printer wizard. Please see the Printing Guide.)
Before installing the printer driver in a Raw TCP environment, confirm the following:
y This equipment is connected to the network and turned on.
y The TCP/IP setting is correct on this equipment and your computer.
You must log into Windows as a user who has “Administrators” or “Power Users” privileges
when using the Windows 2000, Windows XP, or Windows Server 2003.
1
Insert the Client Utilities CD-ROM into the CD-ROM drive.
y The installer automatically starts and the Choose Setup Language dialog box
appears.
y When the installer does not automatically start, double-click “Setup.exe” in the Client
Utilities CD-ROM.
2
Select your language and click [OK].
The Welcome to the InstallShield wizard screen is displayed.