Filter
Top Products
170
8.TROUBLESHOOTING
8
1. When The Following Messages Appear
When the following messages appear on the touch panel, press the [FUNCTION CLEAR] button to clear
the error message and perform the appropriate remedy for the error.
For details of messages not listed below, see the [Operator’s Manual for Basic Functions].
Message Cause Remedy
Memory overflow Memory overflowed when scanning
documents to the memory.
Either wait for memory to be cleared,
or check the jobs and delete reserved
jobs to clear memory.
Communication error Communication error occurred during
direct TX.
Retry communications.
Job reservation full The number of reserved jobs
exceeded 100.
Either wait for job reservations to be
completed, or check the jobs and
delete reserved jobs.
Job memory full The total number of destinations for
outgoing call jobs exceeded 1,000.
Either wait for outgoing call jobs to be
completed, or check the jobs and
delete reserved jobs.
Sorry not possible On-hook or direct TX was attempted
during communications.
Wait for communications to end and
retry communications.
Not allowed now Further polling transmission reserva-
tion was attempted even though poll-
ing transmission was already
reserved.
Either wait for polling transmission
jobs to be completed, or check the
jobs and delete reserved jobs.
Too Many Tel # Digits 128 digits or more were registered for
a chain dial communication.
Confirm the number of digits dialed
and register the numbers again.