Filter
Top Products
54
2.SENDING A FAX
6.Sending Originals (Cont.)
2
Off-hook transmission
This mode is available by picking up the handset of the external telephone to dial. When the other party
receives the call as a telephone call, you can talk with him/her.
• This operation is available when the Line 1 lamp is OFF.
• An external telephone is required (not available for the European version).
• You can specify the remote Fax only using the external telephone.
1
Place the original(s).
• P.26 “Setting originals”
2
Press the [FAX] button on the control panel.
3
Press the [OPTION] button and set the transmission conditions.
• P.29 “4.Setting the Transmission Conditions”
4
Pick up the handset of the external telephone.
5
Dial the remote FAX number with the external telephone.
Each press of a digital key dials a number. If you make a mistake when dialing the remote Fax number, put the
handset down to cut the line, and then pick up the handset again to redial.
6
When you hear the answer tone (short high-pitched tone) through the
handset indicating the connection has been made with the remote
Fax, press the [START] button.
When the other party receives the call as a telephone call, ask him/her to operate their equipment for receiving a
Fax.
7
Replace the handset of the external telephone.