Filter
Top Products
4.8 Top Cover 4 Replacement Procedures
M2 5x6 black flat head screw.
Speaker cable
Power board cable
Touch pad board flat cable
CN600
CN201
CN280
Top cover
Figure 4-12 Removing the top cover
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-11, 4-12.
1. Seat the top cover, adjusting its position.
2. Connect the touch pad board flat cables to CN280 on the system board.
3. Connect the power board flat cable to CN201 on the system board.
4. Connect the speaker cable to CN600 on the system board.
Turn the computer upside down and secure it with the following 18 screws:
- Twelve M2.5x6 black flat head screws.
- Four M2x2 black flat head screws.
Satellite/Satellite Pro/L630/L635 Maintenance Manual 4-25