Filter
Top Products
4 Replacement Procedures 4.9 Display Assembly
4.9 Display Assembly
Removing the Display Assembly
CAUTION: Use care to avoid that the antenna cable is not caught between the display
assembly and computer.
Remove the display assembly according to the following procedures and Figures 4-13.
1. Open the display panel.
M2 5x5 black flat head screw.
LCD FLcable
Wireless LAN antenna
CN3000
Figure 4-13 Removing the display assembly
2. Disconnect the LCD/FL cable from CN3000 on the system board.
3. Remove four M2.5x5 black flat head screws securing the LCD module to the bottom
cover.
4. Remove the wireless antenna cables from the bottom cover.
5. Remove the display module.
4-26 Satellite/Satellite Pro/L630/L635 Maintenance Manual