Filter
Top Products
3 Diagnostic Programs 3.2 Quick Start
In this screen, there are two lines which attribute could be edited and updated. The 1
st
line (the font in yellow with blue background) shows the attribute’s value that is read
from the current system and the 2
nd
line (the font in red with turquoise background)
shows the same value as that in the 1
st
line before user’s editing. User can modify the
attribute’s value in the 2
nd
line and press Enter to confirm the current edition and
continue editing the next attribute.
During the editing, user could press F2 to confirm the DMI attribute update or press F4
to ignore the modification. Press ESC to exit the program of DMI Write.
The confirmation screen is as below:
The attributes that have been modified would be marked in red; otherwise in yellow.
User could press F2 to save the changes, or press F4 to ignore and exit the current
program.
3.2.8 System Information
This function is used to read the system information. When the test is completed, a file
named System.log will be saved in the defined location. During the reading process, the
following screen will be displayed to indicate that the progress is in detection:
10
Satellite/Satellite Pro L630/L635 Maintenance Manual