Filter
Top Products
4. 12 System board 4 Replacement Procedures
4.12 System Board
Removing the System Board
NOTE: Be careful of the eject button for the PC card. It can be damaged when removing
the board. Make sure it is securely installed.
Remove the System Board according to the following procedures and Figure 4-15.
1. Disconnect the card reader board flat cable from CN201 on the system board.
2. Remove the AC-IN cable from CN6000.
3. Remove one M2.5x6 black flat head screw on the system board.
4. Remove one M2x3 black flat head screw on the FAN.
M2x3 black flat head screw
M2 5x6 black flat head screw.
DC IN cable-
CN6000
CN201
Card reader board flat cable
Figure 4-15 Removing the system board
NOTE: Don’t touch the double side tape for keep double tape surface clean and
adhesive while remove the Bluetooth module from ODD bracket, if the double side
tape has no adhesive or broken, please change a new tape. (V000900770).
Satellite/Satellite Pro/L650 Maintenance Manual 4--31