Filter
Top Products
2 Troubleshooting 2.6 SSD
Procedure 1 Test Program Check
Run the Storage test program stored on the maintenance test program disk for all test items.
See Chapter 3 for details on how to use the test program.
If an error is detected during the SSD test, an error code and status will be displayed. The
error codes and their status names are listed in Table 2-2. If an error code is not generated
and the problem still exists, go to Procedure 2.
Table 2- 2 SSD Error Code and Status
Code Status
1
Get Parameter Fail !
Read Old Data Error
2
Write Pattern Error3
Read Back Data Error
4
5
Data Compare Error
6
Restore Data Error
Read Verify Error7
Seek Error
9
10 Disk Controller Self Test Failed
Disk Controller Test unexpected interrupt Failed
11
12
Disk Controller action Test Failed
13
Disk dos not support SMART
Disk read attribute threshold error
14
Disk read attribute value error15
Disk SMART attribute value error
16
2-16 Satellite/Satellite Pro/L650/L655 Maintenance Manual