Filter
Top Products
136
Enhancing Productivity
Inserting and removing hard drives
5.375 x 8.375 ver 2.3
Inserting and removing hard drives
Your Satellite
®
M30/M35 can use various hard drive
capacities. Depending upon the original hard drive installed
in your computer, you may wish to increase storage capacity
by changing the internal drive, or you can also add additional
hard drive space by inserting a drive into the select bay
module.
To change the internal hard drive:
1 Shut down your computer completely using the Shut Down
command. See “Powering down the computer” on page 91.
2 Unplug the computer.
3 Close the display panel and remove any cables you may
have connected.
4 Turn the computer upside down.
5 Remove the screw on the hard drive cover.
Removing the hard drive cover screw
6 Life the edge of the hard drive cover and lift it up to
expose the hard drive.