Filter
Top Products
51
Getting Started
Adding memory
5.375 x 8.375 ver 2.3
2 Pull the clips away from the memory module.
The memory module pops partially out of the slot.
3 Carefully remove the module from the slot.
Removing the memory module
4 Replace the cover plate and screws.
5 Turn the computer over and restart it.
Checking total memory
When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1 Click Start, then click Control Panel.
2 Click Performance and Maintenance.
3 Click System.
4 The General tab view automatically appears and shows
total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly,
as described in step 10 of “Adding memory” on page 46.