Filter
Top Products
84
Getting Started
Turning off the computer
5.375 x 8.375 ver 2.3
1 Click Start, Control Panel, and then Performance and
Maintenance.
2 Click the TOSHIBA Power Saver icon.
3 Click the Setup Action tab.
4 Select Standby for the options you want.
❖ When I press the power button
Set this option to Standby if you want the computer
to go into Standby mode when you slide the power
switch to the left.
❖ When I close the lid
Set this option to Standby if you want the computer
to go into Standby mode when you close the display
panel.
5 Click Apply.
6 Click OK.
For more information about the Power Saver utility, see
“TOSHIBA Power Saver” on page 182.
Once the computer is configured, you can place it into
Standby mode by either sliding the power switch to the left or
closing the display panel, depending on the Standby options
set.
Starting again from Standby mode
To start up the computer from Standby mode, slide the power
switch to the right and hold it until the on/off light glows
green. The computer returns to the screen(s) you were using.
If you place the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
NOTE