Filter
Top Products
October 2000 © TOSHIBA TEC 4 - 1 MD-0101 MECHANICAL DESCRIPTION
4. MECHANICAL DESCRIPTION
4.1 Paper Feed System
The ADU has one transport path as shown above and paper enters the ADU from the top and comes out
from the bottom. Paper is not stacked in the ADU but the ADU only transports the paper by using the two
motors.
Flow of Paper
The flow of paper is as follows:
The one-side-printed paper reversed at the exit unit.
The roller in the exit unit reversely turns to draw the paper into the ADU.
The paper having passed through the ADU is loaded again into the copier from the bottom of the
ADU.
ADU 04-01-01
ADU 04-04-02
Exit roller
ADU paper jam sensor (Upper)
ADU
ADU paper jam sensor (Lower)
Copier
Flow of paper