Filter
Top Products
October 2000 © TOSHIBA TEC 6 - 5 MD-0101 DISASSEMBLY AND REPLACEMENT
[G] ADU feed roller shaft upper/clutch 08S018-06CL
Fig. 6-16
8. Release Spring, remove one screw, and remove
ADU release hook R.
Fig. 6-17
9. Detach one connector from ADU PWA (CN216).
10. Remove 4 screws, release one clamp, and re-
move ADU motor bracket upper.
Fig. 6-18
1. Detach ADU hinge cover F. (See Fig. 6-1)
2. Detach ADU hinge cover R. (See Fig. 6-2)
3. Remove ADU paper guide assembly.
(See Fig. 6-3 and 6-4)
4. Remove ADU. (See Fig. 6-5 to 6-9)
5. Detach ADU cover. (See Fig. 6-10 to 6-12)
6. Detach PWB cover. (See Fig. 6-13)
7. Remove 2 screws and remove ADU release le-
ver.
Screw
ADU release lever
ADU release
hook R
Screw
Spring
ADU PWB
CN216
Clamp
Harness
Screw
Screw
ADU motor bracket upper
236-2
237
238