Filter
Top Products
MD-0101 OPERATIONAL DESCRIPTION 3 - 2 October 2000 © TOSHIBA TEC
3.3 Detection of Abnormal Status
3.3.1 Cover open/close detection
When the ADU cover open sensor detects the open state of the cover, the detection signal is sent to the
copier to stop the transport of paper.
3.3.2 Paper jam detection
When the one-side-printed paper is loaded into the ADU, the ADU paper jam sensors (upper/lower) turn
ON (at “High” level) for a fixed time. If the ADU paper jam sensors (upper/lower) do not turn ON or their
ON time is too long, the program will judge it to be paper jamming and stop the operation. The paper
jamming can be cleared by opening the ADU and removing the paper.