Filter
Top Products
26
Using the handy features
Using auto setting (For computer input only)
This function automatically sets up the projector to the optimum state. It
sets up sampling phase, frequency and screen position for each type of
the input signal by using simple operations.
Press the remote control’s AUTO ADJ. button.
Notes
The image may not be projected or auto adjustment/setting may not
be performed correctly for input signals other than those supported by
the projector.
p.42
If auto setting fails adjustment, adjust manually with Image adjust-
ment menu.
p.30
Correcting the keystone distortion
When the projector placement angle against the screen is changed while projecting
the image, the picture will undergo keystone (trapezoidal) distortion.
This projector is capable of correcting this keystone distortion.
Before correction After correction
Press the remote control’s KEYSTONE +/- button.
You can also select [V Keystone] in the Screen setting menu.
p.32
Notes
Depending on the amount of keystone adjustment and the content
of images, some information may be lost, or the picture quality may
suffer.
Remote
Control
Remote
Control