Filter
Top Products
35Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.3
Do not force the memory module into position. The
memory module should be completely inserted into the
socket and level when secured in place.
The clips on either side of the memory module snap into
place when the memory module is properly inserted.
Sample pressing down on the memory module
14 Replace the memory module slot cover and tighten the
screw.
15 Re-insert the main battery. For information on inserting
the main battery, see “Inserting a charged battery” on
page 48.
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
Removing a memory module
If you need to remove a memory module:
1 Complete steps 1-8 in “Installing additional memory
(optional)” on page 31 to shut down the computer and
open the memory module slot cover.
clip
clip