Filter
Top Products
89
Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
The stop/eject button stops a disc that is currently playing.
You can eject a disc by pressing the stop/eject button twice.
Use this method to eject a disc when the computer is turned
off and after the Music CD button has been pressed.
The next track button skips to the following track on the
disc.
The previous track button returns to the preceding track on
the disc.
Inserting a disc
1 If the computer is turned on, press the eject button on the
DVD-ROM or multi-function drive.
The disc tray partially opens.
To avoid damaging a disc or losing data, check that the disc
activity light is off before opening the disc tray.
2 Grasp the disc tray and pull it fully open.
3 Hold the disc by its edges and check that it is clean and
free of dust.
Handle discs carefully. Avoid touching the surface of the disc.
Grasp it by its center hole and edge. If you handle the disc
incorrectly, you could lose data.
4 Carefully place the disc in the drive tray with its label
facing up.