Filter
Top Products
User’s Manual 7-3
HW Setup and Passwords
HW S
ETUP
AND
P
ASSWORDS
To delete a user password:
1. Select Not Registered to display the following prompt:
Enter Password:
2. Enter the currently registered password. The character string you enter is
displayed as a string of asterisks.
Enter Password: ****
3. Click the OK button. If the character string you enter matches the registered
password, the password option is reset and the display changes to:
Not registered
If they do not match, the following message appears. You must repeat step
1.
Incorrect Password!!!
4. Follow the same procedures described in the earlier section, How to set the
password, to set a new user password.
Display
This tab lets you customize your computer’s display settings for either the inter-
nal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
If you click the OK button before entering the password,
Registered
will appear on the display.
If you enter the password incorrectly three times in a row, the
computer need to shut off
.You will not be able to access the password option in the HW
Setup. In this case you must turn the power off and back on to
retry the procedure
Auto-Selected
Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
LCD+AnalogRGB
Selects both the internal LCD and external monitor for
simultaneous display.