Filter
Top Products
101
3
Staple sort mode
When the Finisher (optional) is installed, automatic stapling is enabled. You can select the stapling position
from three types.
• The paper quantity and weight applicable for this mode differ depending on the Finisher installed in this
equipment. See P.102 “Maximum number of sheets for stapling”.
• Special paper such as OHP films or sticker label cannot be used for stapling.
• Copies in different size cannot be stapled. (When the lengths of the copies are the same, they can be
stapled even if their sizes are different.)
(Example of selecting the [FRONT STAPLE] button)
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. ( P.71 “3.Bypass Copying”)
2
Place the original(s).
3
Press the finisher button on the basic menu.