Filter
Top Products
35
1
User management
In the user management function, the users of the equipment can be limited or the past record of each
user can be managed. When the equipment is managed under this function, turn the power of the equip-
ment ON and enter the information required (e.g. user name, password) to use the equipment. The menu
for entering user information also appears when you pressed the [ACCESS] button on the control panel or
automatic function clear has worked. Enter the information following the procedure below.
1
The menu for user authentication appears.
MFP local authentication, LDAP authentication
Windows Domain Authentication
• The domain name previously set by the network administrator is displayed in [DOMAIN].
If the domain name belonging to your organization is not displayed, press the [DOMAIN] button and select it.