22
23
Preparations
Connection
Before connection
Read the owner’s manual of the device you are connecting to the projector.
Some computers cannot be used with or connected to this projector.
Check for an RGB output terminal, supported signal
p.53
, etc.
Turn off the power of both devices before connecting.
The figure below shows sample connections. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
p.56
•
•
•
•
Notes
The MONITOR OUT terminal outputs analog RGB signals from the COMPUTER 1 IN
terminal or the COMPUTER 2 IN terminal, or outputs Y/PB/PR signals as selected with
the INPUT button. If no input is selected, the MONITOR OUT terminal outputs the input
signals last selected for each input terminal. (Digital RGB signals will not be output.)
Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
A computer monitor cannot accept Y/PB/PR signals correctly.
The AUDIO (L/R) terminal doubles for devices connected to S-VIDEO terminal and
VIDEO terminal.
When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
•
•
•
•
•
•
DVI cable 29-pin
(not supplied)
To DVI output
To DVI
output
DVI cable 29-pin
(not supplied)
Audio amplifier, etc. Video recorder, etc.
Video recorder, etc.
Video recorder,
DVD player, etc.
Conversion adapter
BNC-pin (not supplied)
Monitor cable
Mini D-sub
15P-BNC
(not supplied)
To audio input
White (L)/Red (R)
S-video cable
(not supplied)
To S-video
output
To video
output
Computer
(for control)
Computer
To
RS-232C
terminal
Audio cable
(not supplied)
To audio output
Control cable
RGB cable
(supplied)
To RGB
output
Computer
Audio cable
(not supplied)
Audio cable
(not supplied)
To audio
output
To Y/C
B
/C
R
output
Green (Y)/Blue
(C
B
)/Red (C
R
)
To audio
output
White (L)/
Red (R)
Audio cable
(not supplied)
To audio output
Audio cable
(not supplied)
Audio cable
(not supplied)