Filter
Top Products
48
49
Others
Lens and main unit cleaning
WARNING
Request cleaning and maintenance of a ceiling-mounted unit from your
projector dealership. Attempting to clean or replace the lamp in a high location by
yourself may cause you to fall, resulting in injury.
•
Lens cleaning
Clean the lens with a commercially available blower
and/or lens cleaner.
The lens is easily scratched, so do not rub it with hard
objects, or strike it.
Main unit cleaning
Unplug the power cord before cleaning the main unit.
Wipe dirt off the main unit gently with a soft cloth.
Do not wipe the main unit with a damp cloth. Doing
so may allow water to get inside, resulting in an
electric shock or unit failure.
Do not use benzene, thinner and the like as they
may deform or discolor the unit or damage the paint
surface.
Do not use a chemically saturated cloth.
•
•
•
•
•
•
•
Trouble indications
The indicator illuminates and a beep sound inform you of internal abnormalities.
No power
⇒
Problem with projector
Unplug the power cord, and contact your dealer.•
Lamp went out during use, or won’t come on
⇒
Lamp temperature is high so that it is difficult to turn on, the
lifetime of the lamp has ended or the projector is malfunctioning.
Unplug the power cord and wait for a short while, then turn the
power back on.
If a lamp burns out, replace it with a new one.
•
•
Power went out during use
⇒
Internal overheating, or the outside temperature is too high.
Place the projector so that the air intake and exhaust are not
blocked.
Unplug the power cord and wait for a short while, then turn the
power back on.
The icon will appear before the power goes out.
•
•
Power went out during use
⇒
Problem with internal cooling fan.
Unplug the power cord, and contact your dealer.
The icon will appear before the power goes out.
•
Power went out during use, or power won’t come on
⇒
The lamp cover is not properly attached.
Unplug the power cord, and reattach the lamp cover.
p.45
•
Power went out during use
⇒
Problem inside the projector.
Unplug the power cord and wait for a short while, then turn the
power back on.
If the above action will not clear the problem, unplug the power
cord, and contact your dealer.
The icon will appear before the power goes out.
•
•
Note
After there is an abnormal indication, the abnormal status remains until the main power
switch is turned off.
•
Others
(Off)
(Red lit)
(Red flashing)
Or
(Red lit)
(Red lit)
(Red lit)
(Red
flashing)
(Red lit)
(Green
flashing)
(Red lit)
(Orange
flashing)
(Red lit)
(Orange lit)
Or
(Orange
flashing)