Filter
Top Products
37
Operations
36
Item
Description
Computer Y/PB/PR Video
S-video
Wireless/
USB
Position Frequency Ye s N o N oNo No
Adjust to eliminate periodic patterns and
flickering when many fine vertical lines
appear on the screen.
H-position Ye s N o N oNo No
Adjust the horizontal position of the image.
V-position Ye s N o N oNo No
Adjust the vertical position of the image.
Clamp 1 Ye s N o N oNo No
Adjusts the clamp pulse position.
Clamp 2 Ye s N o N oNo No
Adjusts the clamp pulse width.
*1: [Noise reduction] may not work depending on signal type.
*2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.
Using the menus (Continued)
■ The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
Item
Description
Computer Y/PB/PR Video
S-video
Wireless/
USB
Contrast Adjust the image contrast. Yes Yes Yes Yes Yes
Lower
Higher
Brightness Adjust the brightness of the image. Yes Yes Yes Yes Yes
Darker
Brighter
Color Adjust the color of the image. No Yes Yes Yes No
Lighter
Deeper
Sharpness Adjust the sharpness of the image. No Yes Yes Yes No
Softer
Sharper
Noise Set the function to reduce screen noise. No Yes Yes Yes No
reduction
*1
On (Enable) Off (Disable)
Picture mode Press . Toggle the picture mode with No Yes Yes Yes No
.
1/2/3
1/2/3/4/5 Yes No No No Yes
/
/
R-level Adjust red of the image color. Yes Yes Yes Yes Yes
Less red
More red
G-level Adjust green of the image color. Yes Yes Yes Yes Yes
Less green
More green
B-level Adjust blue of the image color. Yes Yes Yes Yes Yes
Less blue
More blue
NTSC mode
*2
Set the black level with .NoNoYesYesNo
US : NTSC (US) mode
JAPA N:NTSC (JAPAN) mode
Auto setting Automatically adjusts items such as the Yes No No No No
samplingphase depending on the type of
input signal.
Position Press then change mode using Ye s N o NoNo No
and adjust with
.
Phase Ye s N o NoNo No
Adjust to eliminate flicker.