Filter
Top Products
67
Operations
66
• Autostart
Check the Start playing the file automatically when starting transmission checkbox
to automatically start playing the video file when connecting to the projector.
• Repeat
Check the Play repeatedly after the end of playing checkbox to automatically repeat
from the beginning when the file reaches the end.
4
Click on the Browse button and
select the file to send.
Clicking on the Browse button displays the Open
dialog box. Select the file to send then click on the
Open button.
The selected file is added to the pull-down list in the
Wireless Utility’s Select file field.
5
Select the file to send from the pull-
down list of the Transmission File
field.
Click on the Transmission File field’s button to
display the pull-down list. Select the file to send
from this list.
A thumbnail of the selected file appears in the
Preview box. The file displayed here will be
transmitted.
Step
4
can be skipped.
The way that drag and drop the file to send from the desktop or Windows Explorer into
the Preview box is also available. In this case as well, the selected file is added to the
pull-down list.
6
Select the projector to transmit
to.
The IDs of projectors accessible for transmission
will be listed. (If projector name has been set up
already, it is shown.) Select the checkbox of the
projector to be transmitted to from this list. Then
icon
is displayed on the projector's screen
for few seconds.
It is possible to select only one projector.
5
Select the projector to be
transmitted.
The IDs of projectors accessible for transmission
will be listed. (If projector name has been set up
already, it is shown instead of the MAC address.)
Select the checkbox of the projector to be
transmitted to from this list. Then icon
is
displayed on the projector’s screen for few
seconds.
It is possible to select up-to four projectors.
6
Click on the button.
The selected file’s image is displayed by the projector.
Note
•
Only one file can be sent at a time. To send another file, repeat steps
4
and
6
.
■ Displaying a video file saved on a computer via the projector
1
Launch the Wireless Utility software application.
The Screen Image transmission mode window appears on the computer's screen.
2
Click on the icon.
The Wireless Utility window changes to Movie
File transmission mode.
3
Click on the Advanced button.
The Movie file: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
• Interruption
Check the No Interruptions checkbox to prevent
other computers from interrupting the projector, for
example, during presentation in the Update
automatically mode.
• Transmission Mode (Sound)
Check the Transmit sound to a projector (Only
when connected with only one projector)
checkbox to transmit the sound being played on a
computer to the projector.
Using the Wireless Utility (Continued)