Filter
Top Products
4. MAINTENANCE
ENGLISH VERSION EO1-33034
4.1 Cleaning
E4- 2
4.1.2 Covers and Panels
4.1.3 Optional Cutter Module
Wipe the covers and panels with a dry soft cloth or a cloth slightly
moistened with mild detergent solution.
The swing cutter and rotary cutter are available as an option. They are
both cleaned in the same way. When removing the Cutter Cover of the
rotary cutter unit, remove the screws from the bottom of the cover.
1.
Loosen the two screws to remove the Cutter Cover.
2.
Remove the Plastic Head Screw to detach the Media Guide.
3.
Remove the jammed paper.
4.
Clean the Cutter with a soft cloth slightly moistened with alcohol.
5.
Reassemble the Cutter Module in the reverse order of removal.
CAUTION!
1. DO NOT POUR WATER
directly onto the printer.
2. DO NOT APPLY cleaner
or detergent directly onto
any cover or panel.
3. NEVER USE THINNER
OR OTHER VOLATILE
SOLVENT on the plastic
covers.
4. DO NOT clean the panel,
covers, or the supply
window with alcohol as it
may cause them to
discolour, loose their
shape or develop
structural weakness.
WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure
yourself when cleaning.
Swing Cutter
Cutter Unit
Screw
Fixed Cutter
Cutter Cover
Plastic Head
Screw
Media Guide