Toshiba TECRA P5 Laptop User Manual


 
User’s Manual 6-13
Power and Power-Up Modes
Power-up modes
The computer has three different power-up modes as follows:
Boot Mode : The computer will shut down without saving data - in view
of this you must always save your work before you turn the computer
off.
Hibernation Mode : Data in memory will be saved to the hard disk drive.
Sleep Mode : Data will maintained in the computer's memory.
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, Start -> Control
Panel -> System and Maintenance -> Power Options).
Hot keys
You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter
Hibernation Mode - please refer to Chapter 5, The Keyboard for further
details.
Panel power on/off
You can set up your computer so that power is turned off automatically
when you close the display panel, and turned on again when you open it.
Please note that this function is only available for Sleep Mode or
Hibernation Mode, not for Boot Mode.
System Auto Off
This feature turns the system off automatically if it is not used for a set
period of time, and can be configured for both Sleep Mode or Hibernation
Mode.
Please refer to the sections Turning on the power and Turning off the
power in Chapter 1, Getting Started for further information.
If the panel power off function is enabled, and you manually shut down
Windows, do not close the display panel until the shut down process has
been completed.