Toshiba TECRA P5 Laptop User Manual


 
User’s Manual 3-24
Hardware, Utilities and Options
2. Connect the monitor cable to the external monitor port.
Figure 3-10 Connecting the monitor cable to the external monitor port
3. Turn the external monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the FN + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press FN + F5 hot key again to
switch to the internal display).
Please refer to Chapter 5, The Keyboard, for further details on using hot
keys to change the display setting.
USB FDD Kit
The USB floppy diskette drive accommodates either a 1.44MB or 720KB
floppy diskette and connects to one of the computer's USB ports.
Figure 3-11 The USB floppy diskette drive
External monitor port
Monitor cable
Do not disconnect the external monitor when in Sleep or Hibernation
Mode. Turn off the computer before disconnecting the external monitor.
Eject button
Floppy
diskette slot
Disk-In-Use
Indicator
USB connector