Filter
Top Products
48
CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Audio
Adjust the sound volume emitted from the speaker.
The sound is emitted from the speaker.
No sound is emitted from the speaker.
Return the adjustments and settings of FULL MENU [Audio] to the factory default values.
The loudness effect is added to the speaker sound.
The loudness effect is not added to the speaker sound.
The sound of the left and right channels is mixed and emitted from the speaker.
Only the sound of the left input channel is emitted from the speaker.
Only the sound of the right channel is emitted from the speaker.
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye sYe s Ye s Ye s
-
-
-
-
-
Y/P
B
/P
R
Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-Video Camera
Analog RGB
Volume ADJ.
Speaker output On SET
Off SET
Reset
EXEC.
Loudness On SET
Off SET
Channel select L+R SET
L SET
R SET
You can set the sound emitted from the speaker from FULL MENU [Audio].
To operate FULL MENU, refer to page
43
.
Notes
• When the camera input is selected, sound is not emitted.
• Each item can be set at every input source except the camera input, but the settings made at one input source are applied to all input sources as shown
in the table. The sound volume can be adjusted for each input source except the camera input.
• The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.