Filter
Top Products
4.6 SSD/HDD and Fan 4 Replacement Procedures
6. Place the SSD/HDD pack on a flat surface (such as a desk), and remove the four M3
x 3.5 black flat-head screws.
7. Place the SSD/HDD pack on a flat surface (such as a desk), and remove the chassis.
M3 x 3.5 black flat-head screw
HDD
SSD/HDD chassis
Figure 4-13 Removing the SSD/HDD chassis
M3 x 3.5 black flat-head screw
SSD/HDD Chassis
SSD
Figure 4-14 Removing the SSD/HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.
TOSHIBA NB100 Maintenance Manual 4-25