Filter
Top Products
4 Replacement Procedures 4.11 Touch Pad Board
4.11 Touch Pad Board
Removing the Touch Pad Board
Remove the touch pad board according to the following procedures and Figure 4-22.
1. Disconnect the touch pad flat cables from CN508 and CN507 on the touch button
board.
2. Remove two M2 x 4 black flat head screws securing the button board.
3. Remove one M2 x 2.5 black flat head screw securing the touch pad finger.
4. Remove the touch pad board and touch pad finger.
Touch pad finger Touch pad
Touch pad board
M2 x 4 black flat-head screw
M2 x 2.5 black flat-head screw
CN507
CN508
Figure 4-22 Removing the touch pad board
4-38 TOSHIBA NB100 Maintenance Manual