Filter
Top Products
25
Operations
■ Manually selects an input source (Source)
If you are connecting multiple sources to the projector
simultaneously, press the control panel’s SOURCE button
or the remote control’s Source button. The projector will
detect your source.
Note
• The image may not be projected or auto adjustment/setting may not be performed correctly for
input signals other than those supported by the projector
p.40
,
p.41
.
■ Correcting the keystone distortion (Keystone)
When the foot adjuster
p.24
is used to change the projector placement angle while
projecting the image, the picture will undergo keystone (trapezoidal) distortion.
This projector is capable of correcting this keystone distortion
.
Use the control panel's
buttons or the
remote control's Keystone
Keystone
buttons for keystone adjustment.
Notes
• Keystone adjustment is available for the keystone distortion in a slant angle of ±15 degrees.
• Keystone adjustment will not change the shape of the menus, the start-up screen, and the
background (with no signal input).
Using handy features
Control panel
Remote
Control
Before correction After correction