Filter
Top Products
115
4
3
Specify following items as required.
• ENABLE HTTP SERVER — Press the [ENABLE] button to enable the HTTP network server service, or [DIS-
ABLE] button to disable the HTTP network server service. This must be enabled for TopAccess, e-Filing web
utility, and IPP printing.
• [PRIMARY PORT NUMBER] — Press this to enter the primary port number to be used for the HTTP access
from the other client. It is recommended to use the default port number “80” if you are not sure changing this
port number.
• [SECONDARY PORT NUMBER] — Press this to enter the secondary port number to be used to access the
TopAccess and e-Filing web utility. It is recommended to use the default port number “8080” if you are not sure
changing this port number.
• ENABLE SSL — Press the [ENABLE] button to enable the SSL for accessing the administration pages in
TopAccess and e-Filing web utility, or [DISABLE] button to disable the SSL for accessing the administration
pages in TopAccess and e-Filing web utility. When this is enabled, the data transferred between the equipment
and client computers will be encrypted using a private key when operating TopAccess and e-Filing web utility.
To enable SSL, you must create a self-signed certificate in the equipment using TopAccess. If the selfsigned cer-
tificate is not created, the SSL cannot be enabled.
4
Press the [ENTER] button.
• Returns you to the NETWORK menu.
5
Continue to another network setting if required, then press the
[APPLY NOW] button.
• This equipment starts initializing the network interface card to apply the changes.