Filter
Top Products
127
4
Setting the Line-2 Mode
The LIne-2 Mode settings are available only when the optional Fax unit and optional Line-2 board are
installed.
Installing the 2nd line board (option) allows transmission during reception, reception during transmission,
and simultaneous two communications of transmission/reception.
When the 2nd line is used, the following function setting and registration are required.
• Entering terminal ID P.12 2
• Dial type setting P.125
• Line-2 setting (following instruction)
• The 1st line takes precedence in the initial setting (not including the case that LINE 2 is selected in the
LINE SELECT when you register remote fax numbers into the address). If you want the 2nd line to
have priority in the initial setting, ask your service technician.
When the optional 2nd line board is installed, its operation can be selected from the following:
• Transmission/Reception
Both transmission and reception are available all the time.
• Reception only (24 hours)
The 2nd line is always standing by for reception.
• Reception only (timer)
Only reception is available during the specified period of time.
* Even during reception only, the specified line performs transmission if any line has been specified by
the options or address menu.
Entering Line-2 Mode Setting
1
Press the [FAX] button in the ADMIN menu.
• The FAX menu is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P.82