Filter
Top Products
51
CONTENTS
Adjustments &
Settings
FULL MENU settings - Default setting
Reset
Return the settings of FULL MENU [Default setting] to the factory default values.
EXEC.
Projection mode Standard
The projector is set to the floor-mounted front projection mode.
SET
Rear
The projector is set to the floor-mounted rear projection mode.
SET
Ceiling
The projector is set to the ceiling-mounted front projection mode.
SET
Rear ceiling
The projector is set to the ceiling-mounted rear projection mode.
SET
Background
Logo The TOSHIBA logo is displayed when no signal is input.SET
Blue The entire screen is set to blue when no signal is input.SET
None Nothing is displayed when no signal is input.SET
No signal power off
Off
The power does not turn off automatically even if no signal status continues.
SET
5 min.
The power turns off automatically when no signal status continues for approx. 5 min.
SET
: COMPUTER IN 1 connector is selectable with the INPUT button.
: COMPUTER IN 2 connector is selectable with the INPUT button.
VIDEO : Video input is selectable with the INPUT button.SET
Input source setting
SETCOMPUTER IN 1
: Use COMPUTER IN 1 connector as Analog RGB (1) input.
SETAnalog RGB(1)
: Use COMPUTER IN 1
connector
as Y/PB/PR input.SETY/PB/PR
SETCOMPUTER IN 2
: Use COMPUTER IN 2 connector as Analog RGB (2) input.
SETAnalog RGB(2)
: Use COMPUTER IN 2
connector
as Digital RGB input.SETDigital RGB
S-VIDEO : S-Video input is selectable with the INPUT button.SET
CAMERA : Camera input is selectable with the INPUT button.SET
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Power on Manual The power turns on by pressing the ON/STANDBY button.SET
Auto When the power plug is inserted, the power is on.SET
Ye s
(common for all of the inputs)
Start-up screen On
The start-up display appears when the power is turned on.
SET
Off
The start-up display does not appear when the power is turned on.
SET
Ye s
(common for all of the inputs)
Ye s
(common for all of the inputs)
Digital RGB
Y/P
B
/P
R
Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-Video Camera
Analog RGB(1) Analog RGB(2)
: On/Off with ENTER
: On/Off with ( ) or ( )
You can set the Input source, projection mode, etc. from FULL MENU [Default setting].
To operate FULL MENU, refer to page
44
.
Notes
• It is impossible to exit from the menu if no input source is selected.
• If setting of the input source is changed, the setting becomes effective the next time the input is changed.
• In the following conditions, the function to detect no signal (“No signal background”, “No signal power off”) does not activate:
1) When “Video mode”
46
is set to the modes other than [Auto] and Video input or S-Video input is selected.
2) When “Signal format”
46
is set to the modes other than [Auto] and Y/PB/PR input is selected.
• Note that the projector automatically powers up at the restoration of power after a failure, if “Power on” is set to [Auto] with the power plug inserted.
• Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if
a power failure occurs while the projector is on, the settings are not memorized.