Filter
Top Products
When your computer battery capacity is too low to continue, "System ON
CDP Charge Mode" may not work. In those cases, connect the AC adaptor
and reboot the computer.
Never use USB cables not supporting this feature when "System ON CDP
Charge Mode" (DC5V, 1.5A) is enabled.
Always use the USB cable that was included with your USB device.
When "System ON CDP Charge Mode" or "USB Sleep and Charge
function" is enabled, the "USB Wakeup" function will not work. In that case,
use a USB port without "USB Sleep and Charge function" or disable both
"System ON CDP Charge Mode" and "USB Sleep and Charge function".
SATA
This feature allows you to set conditions for SATA.
SATA Interface setting
This feature allows you to set SATA interface setting.
Performance Let HDD work with maximum performance.
(Default)
Battery life Let HDD work with battery life mode. If this
setting is selected, this caused performance
down.
Advanced
This tab allows you to set the conditions for each device or function.
You can enable or disable the device or function you selected for power
management. Disabled mode consumes less power.
If you disable a device or function, you must re-enable it before you can
use it again.
TOSHIBA PC Health Monitor
The TOSHIBA PC Health Monitor application proactively monitors a
number of system functions such as power consumption, battery health
and the system cooling, informing you of significant system conditions. This
application recognizes the system and individual component serial
numbers, and will track specific activities related to the computer and their
usage.
The collected information includes device operation time and number of
actuations or status changes (i.e.: number of power button and FN key
combination uses, AC adaptor, battery, LCD, fan, SSD, sound volume,
wireless communication functionalities), date of initial system use, and also
PORTÉGÉ Z930/Satellite Z930 Series
User's Manual 4-22