Filter
Top Products
TL-MR3220 3G/3.75G Wireless Lite N Router
-83-
Figure 4-62 Static Routing
To add static routing entries:
1. Click Add New… shown in Figure 4-62, you will see the following screen.
Figure 4-63 Add or Modify a Static Route Entry
2. Enter the following data:
¾ Destination IP Address - The Destination IP Address is the address of the network
or host that you want to assign to a static route.
¾ Subnet Mask - The Subnet Mask determines which portion of an IP Address is
the network portion, and which portion is the host portion.
¾ Gateway - This is the IP Address of the gateway device that allows for contact between
the Router and the network or host.
3. Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.