Filter
Top Products
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide
- 15 -
¾ Secondary Connection - It's available only for PPPoE Connection. If your ISP provides
an extra Connection type such as Dynamic/Static IP to connect to a local area network,
then you can check the radio button of Dynamic/Static IP to activate this secondary
connection.
z Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
z Dynamic IP - Use dynamic IP address to connect to the local area network provided
by ISP.
z Static IP - Use static IP address to connect to the local area network provided by
ISP. IP Address - IP Address - Enter the IP address provided by ISP for the
secondary connection. This address is used only for accessing the local area
network of the secondary connection. Subnet Mask - Enter the subnet mask
provided by ISP for the secondary connection.
If you select Static IP manually, the next screen will appear as shown in Figure 3-9.
Figure 3-9 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
¾ Default Gateway - Enter the gateway IP address into the box if required.
¾ Primary DNS - Enter the DNS Server IP address into the box if required.
¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field.
If you select L2TP/Russian L2TP and PPTP/Russian PPTP manually, the next screen will
appear as shown in Figure 3-10 and Figure 3-11.