Filter
Top Products
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide
- 18 -
¾ WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.
z PSK Password - You can enter ASCII or Hexadecimal characters.
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key and
all related wireless security settings.
¾ No Change - If you chose this option, wireless security configuration will not change!
¾ More Advanced Wireless Settings – Select to configure more wireless parameters.
Figure 3-13 Quick Setup - More Advanced Wireless Settings
¾ Mode - This field determines the wireless mode which the Router works on.
¾ Channel Width - Select any channel width from the drop-down list. The default setting
is automatic, which can adjust the channel width for your clients automatically.
¾ Channel - This field determines which operating frequency will be used. The default
channel is set to Auto, so the AP will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
These settings are only for basic wireless parameters. For advanced settings, please refer to
4.6 Wireless
.
5. Click the Next button. You will then see the Finish page as shown in Figure 3-14.
Click the Finish button to finish the Quick Setup.
Figure 3-14 Quick Setup - Finish