Filter
Top Products
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide
37
)
Note:
When the trigger connection is released, the according opening ports will be closed.
Each rule allowed to be used only by one host on LAN synchronously. The trigger connection of
other hosts on LAN will be refused.
Incoming Port Range cannot overlap each other.
3.7.3 DMZ
The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose
service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the
same time. Any PC whose port is being forwarded must have its DHCP client function disabled
and should have a new static IP Address assigned to it because its IP Address may change when
using the DHCP function. You can set up DMZ host on this page shown in figure 5-29:
Figure 3-32 DMZ
To assign a computer or server to be a DMZ server:
1. Click the Enable radio button
2. Enter the local host IP Address in the DMZ Host IP Address field
)
Note:
After you set the DMZ host, the firewall related to the host will not work.
3.7.4 UPnP
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to
access the local host resources or devices as needed. UPnP devices can be automatically
discovered by the UPnP service application on the LAN. You can configure UPnP on this page
that shown in
Figure 3-33:
Figure 3-33 UPnP Settings
¾ Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable