Filter
Top Products
1
Chapter 1 Introduction
1.1 Product Overview
MFP and Storage Server enhances capability by letting you place your USB devices at convenient
locations directly on the Ethernet network. It’s designed to connect your USB printers, MFP, and
USB storage devices to your network, allowing all network users access to these USB devices
remotely.
1.2 Network Management
MFP and Storage Server supports the WEB management, which remote management and a
warning. A standard WEB server is permanent on its MFP and Storage Server. Any standard WEB
browser can be used to access and manage the MFP and Storage Server.
1.3 Components and Features
¾ 1-USB 2.0 Port MFP and Storage Server
¾ 1 USB 2.0 port (High-speed)
¾ Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX
¾ LINK LED to indicate network connection, 100M LED to indicate 100M connection, USB LED
to indicate USB status
¾ One Setup CD for Windows 2000/XP/Vista/7, and User’s Guide
¾ One power adapter
¾ Built-in Reset Button
Before you start, you should prepare:
z One Windows 2000/XP/Vista/7 computer with CD-ROM drive
z One USB device with USB port
1.4 Hardware Installation
Make sure that your USB devices are switched off and that the MFP and Storage Server’s power
adapter is disconnected.
1. Connect your USB device to the USB port of the MFP and Storage Server.