Filter
Top Products
10.3.3 VLAN Binding
On this page you can bind a policy to a VLAN.
Choose the menu ACL→Policy Binding→VLAN Binding to load the following page.
Figure 10-11 Bind the policy to the VLAN
The following entries are displayed on this screen:
VLAN-Bind Config
Policy Name: Select the name of the policy you want to bind.
VLAN ID: Enter the ID of the VLAN you want to bind.
VLAN-Bind Table
Index: Displays the index of the binding policy.
Policy Name: Displays the name of the binding policy.
VLAN ID: Displays the ID of the VLAN bound to the corresponding policy.
Direction: Displays the binding direction.
Configuration Procedure:
Step Operation Description
1 Configure ACL rules Required. On ACL→ACL Config configuration pages,
configure ACL rules to match packets.
2 Configure Policy Required. On ACL→Policy Config configuration pages,
configure the policy to control the data packets those match
the correspo
nding ACL rules.
3 Bind the policy to the
port/VLAN
Required. On ACL→Policy Binding configuration pages,
bind the policy to the port/VLAN to make the policy effective
on the corresponding port/VLAN.
Note:
For TL-SG2216/TL-SG2424/TL-SG2424P, you can bind one policy to multiple VLANs; but for
TL-SG2452, you can bind one policy to only one VLAN
120