Filter
Top Products
Configuration Command Reference Listing
Trango Broadband Wireless — Atlas5010 page 24
defaultopmode [on|off] Set or display default opmode. Radio must be set to opmode ON to
establish wireless link.
Default setting=OFF
encrypt [on|off] Enable or disable proprietary 128 bit tx encryption.
Default setting=OFF
encrypt key <key> Change encryption key (128 bits)
<key> = xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
exit Exit telnet session
freq [<ch#> <antenna>] Set or display channel and antenna selection.
freq writechannel <ch#> <freq>… Modify channel table, up to 6 channels at a time.
freq writechannel default Restore factory default channel table.
help [<command>] Display command usage and syntax.
ipconfig [<ip> <subnet> <gateway>] Change ip configuration.
<ip> = ip address
<subnet> = subnet mask
<gateway> = gateway ip address
linktest <local tx rate> <peer tx rate>
[<pkt size> [<# of pkt> [<# of
cycle>]]]
RF link loopback test .
This is the primary loopback test utility for evaluating over-the-air
link quality. Provides link reliability information and dropped packet
statistics. Standard linktest transmits 1600 byte packets, 1000
packets per second for 10 cycles. User can specify packet size,
quantity of packets, number of cycles
<tx rate> = 6,12,18,24,36,48,54 Mbps
mi 4.3dro(f#.4492)-3# d p0831(Sify.9(# )r(o)3.8(f6(di(Dit)8e)8.1(xnet)3.2( m)15(xiet)3.2(ts,)4.5et)3.2(-5(f.9(# )ret)3.2( rm)n(f6(x)-4(f6(… )3492IR).))6.1( Mfo)7(Ug)-5.3(ar)-4(ati3.2(d8e)8.1RU cycles)2.p08-13.4491 -1.1497 T*-0.0014 Tc0.00c1(est tr(0)-4-4.4(acd)-4.4( ptre)8.ith a)-0.7(t s(ffere(est trt n)-4.4 s(r4(tili.ity asymmetricca)6.uili.it)6(bytel)7(r s Stand)-4.4d ics. Stack)-5(et 1 0 TD-0.0c0.00do))6.1wway ind)-4.4l3# 7(r s-4.4a) ip a-4.4.)1.9(ze,] )Tjs o=d f3# odress