Filter
Top Products
HD Mesh Node
Trango Broadband Wireless — High Density MESH page 12
Primary Features and Pages of the Winbox Interface:
Menu Bar: Winbox has a menu bar that runs along the left-hand side of the page.
Interface
: General information of the interface, Status, Ethernet port settings and traffic.
Wireless
: Wireless status, Access List, Registration, Connect List, Security Profiles, and wireless settings.
Bridge
: Shows Bridge status, Ports in the Bridge, Filters, Broute, NAT and Hosts.
PPP
: Configure PPP interface, Secrets, Profiles, and Active Connections
IP
: Includes the following Menus: Addresses, Routers, Pool, ARP, VRRP, Firewall, Socks, UPnP, Traffic
Flow, Accounting, Services, Packing, Neighbors, DNS, DHCP Client, DHCP Server, DHCP Relay, Hotspot,
IPSec, and Proxy.
Routing
: Display menus for the following: BGP, RIP, OSPF, and prefix
.
Ports
: Displays the serial port where the following setting can be changed. Name, Baud Rate, Data Bits,
Parity, Stop Bits and Flow Control.
Queues
: Display Simple Queues, Interface Queues, Queue Tree, and Queue Types.
Drivers
: Displays drivers for the Ethernet and Wireless chip set.
System
: This button shows setting for Identity, Clock, Resources, License, Packages, Auto Upgrade,
Logging, History, Console, Scripts, Scheduler, Watchdog, Reboot, Shutdown, NTP Client and NTP Server.
Files
: Displays files on your router which include backups and hotspot html pages.
Log
: Display the log information of the router.
SNMP
: SNMP Server setting. By default public has read only access.
Users
: Displays Users information. By default there is only one account admin which has full access.
Radius
: Radius information is displayed and can be configured.
Tools
: Tools menu has the following tools: Ping, MAC Ping, Traceroute, Bandwidth Test, BTest Server,
Traffic monitor, Packet Sniffer, Torch, MAC Server, Graphing, IP Scan, Ping Speed, Flood Ping, and
Netwatch.
New Terminal
: Opens a CLI session to the router.
Telnet
: Allows to telnet to an IP address using the following methods of telnet. Telnet, SSH, and MAC Telnet.
Password
: Changes the password of the account that is currently being used.
Certificate
: This menu allows you to see the current Keys, Import, Decrypt and Reset keys.
Make SUPOUT.rif
: This will prompt for a file name that will be created with troubleshooting information.
Manual
: The Manual button is a direct link to Microtik’s manual.
Exit
: This will close the Winbox session.