Filter
Top Products
HD Mesh Node
Trango Broadband Wireless — High Density MESH page 32
Configuring DHCP Server via CLI Setup
Following the menu option the following information will need to be provided in order to create the
DHCP Server
• DHCP server interface:
• DHCP address space:
• gateway for DHCP network:
• DHCP relay
• addresses to give out:
• DNS servers:
• lease time:
Example of a configured DHCP server.
+ s - setup dhcp server
p - setup pppoe client
t - setup pptp client
* x - exit menu
your choice: s
dhcp server interface: ether6
dhcp address space: 192.168.0.0/24
gateway for dhcp network: 0.0.0.1
dhcp relay: 0.0.0.0
addresses to give out: 0.0.0.2-255.255.255.254
dns servers: 192.168.1.1,10.8.0.2
lease time: 3d
#Adding DHCP server IP address pool
/ip pool add name=dhcp-pool-1 ranges=0.0.0.2-255.255.255.254
#Adding DHCP network
/ip dhcp-server network add address=192.168.0.0/24 \
dns-server=192.168.1.1,10.8.0.2 gateway=0.0.0.1 comment="added by setup"
#Adding DHCP server
/ip dhcp-server add interface=ether6 address-pool=dhcp-pool-1 \
lease-time=3d00:00:00 disabled=no
r - reset all router configuration
+ l - load interface driver
+ a - configure ip address and gateway
+ d - setup dhcp client
+ s - setup dhcp server
p - setup pppoe client
t - setup pptp client
* x - exit menu
your choice: x
[Safe Mode released]
Setup completed successfully.
[admin@HDMESH] >