Filter
Top Products
HD Mesh Node
Trango Broadband Wireless — High Density MESH page 26
Configuring OSPF
OSPF stands for Open Shortest Path First. This routing protocol is the key to creating redundancy by
the HD Mesh node. This Section will cover how to configure OSPF. The OSPF configuration window can be
opened by selecting Routing then OSPF. (Figures 34 & 35)
Figure 34 Figure 35
Create an area by clicking on the ‘area’ tab and then clicking on the red plus sign. This will open the New
OSPF Area. The following information will need to be supplied. The Area NAME, AREA ID in dotted format.
The rest of the options can remain the same. (Figure 36)
Note: THIS INFORMATION MUST BE THE SAME FOR ALL ROUTERS PARTICAPTING IN THE
MESH
Figure 36