Filter
Top Products
Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
142
Port Mirroring Commands Set
Commands Level Description Example
monitor
[RX|TX|Both]
I
Configure source port
of monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#monitor RX
monitor rx [Port ID] G
Set RX destination
port of monitor
function
switch(config)#monitor rx 2
monitor tx [Port ID] G
Set TX destination
port of monitor
function
switch(config)#monitor tx 3
show monitor P
Show port monitor
information
switch#show monitor
show monitor I
Show port monitor
information
switch(config)#interface
fastEthernet 2
switch(config-if)#show monitor
no monitor I
Disable source port of
monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#no monitor
802.1x Commands Set
Commands Level Description Example
8021x enable G
Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G
Use the 802.1x
system radius IP
global configuration
command to change
the radius server IP.
switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport G
Use the 802.1x switch(config)# 8021x system