Filter
Top Products
EN
22
14) Connecting the SurfTab to a television
You can transfer the image and sound from the SurfTab to a suitable television
via HDMI cable or Miracast.
Connecting to a television via Miracast
Miracast technology is a peer-to-peer standard for image transfer. The SurfTab
supports this standard and enables wireless transfer of image and sound from
the SurfTab to a WiFi and Miracast-enabled television device.
i
The SurfTab can connect to your television via Miracast only if the television
also supports Miracast technology. Please check with your television
manufacturer if necessary.
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television’s operating
instructions for details).
b) Tap the Windows button to switch to the home screen of your SurfTab.
c) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
d) Tap "
DeviCes" in the Charm Bar.
e) Now tap "
projeCt".
f) Tap "
aDD a Wireless Display". The SurfTab now searches for available Miracast
devices nearby. A list of all available Miracast devices then appears.
g) Tap the device that you wish to connect to.
h) A short time later, the selected device will show the display of the SurfTab.
i
If your television device does not support Miracast technology, a "Miracast dongle"
can be used to connect the SurfTab via Miracast. In this case, you must ensure that
the selected dongle is compatible with both the SurfTab and your television.