Filter
Top Products
EN
25
f) Under "imporant upDates", select how the SurfTab should proceed with
updates in future.
i
Further down on the same screen, you can also specify how the SurfTab should
handle other forms of updates ("reCommeNded updates" and "miCrosoft update").
g) Confirm your selection with "
apply".
17) Performing a system backup
To enable a system recovery (including all data) in the event of failure, the SurfTab
allows you to make a "system image" backup. We recommend performing the
backup using an external hard drive. To do so, proceed as follows:
a) Connect an external hard drive via the included USB host adapter cable to
the Micro-USB port on the SurfTab.
b) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
c) Tap "
settings" in the Charm Bar.
d) Now tap "
Change pC settings" in the bottom-right area.
e) Tap "
Control panel" in the bottom-left area in the device settings.
The Control Panel in the desktop view opens.
f) Tap in the Control Panel under "
system anD seCurity" on "save BaCkup Copies oF
your Files With File history".
g) Tap "
system image BaCkup" in the bottom-left area of the following window.
The SurfTab asks where you would like to save the backup.
h) In this window, select (highlight) "
on a harD Disk", and in the drop-down
window directly beneath, select the connected external hard drive as the
target drive for saving the system image.
i) Confirm by tapping "
next" in the bottom-right area of the window.
The SurfTab shows which drives will be backed up. Confirm by tapping
"start BBaCkup".
The system image is created and stored on the hard drive.